江苏A级防火保温材料纳米气凝胶毡

使用微信扫描二维码分享朋友圈，成交更快更简单！

江苏A级防火保温材料纳米气凝胶毡

廊坊陶戈纳米气凝胶毡是以纳米二氧化硅气凝胶为主体材料，通过特殊工艺复合而成。具有导热系数低、密度小、柔韧性高、、防水等性能，同时兼具的隔声减震性能，可取代玻璃纤维、石棉保温毡、硅酸盐纤维等不环保、保温性能差的传统柔性保温材料。
Using special nanotechnology, FMB400 combines a silica aerogel with reinforcing fibers to deliver very low thermal conductivity, low density and good flexibility in an environmentally safe product. FMB400 provides excellent properties of waterproof, sound absorption and shock absorption.
FMB400 is an alternative to the common, environment unfriendly, inferior insulation products, such as PU, asbestos insulation felt, silicate fibers, etc.

物理性能Physical Properties
FMB400（3；6；10）
产品厚度Thickness 3mm 6mm 10mm
宽度Width 1200mm
长度Length 30m
使用温度Use Temp. 0-400 ℃
颜色Color 黑色Black
密度Density 200 ± 20kg/m3
导热系数(25℃)
Thermal Conductivity ≤0.018W/(m•K)

主要性能特点Properties
保温绝热
FMB400长期高使用温度达400℃，导热系数仅为传统材料的1/3~1/5，保温后热损失小，空间利用率高，高温下性能优势更加明显。
Superior Thermal Performance
The maximum use temperature is 400℃,
Its thermal conductivity is 1/3~1/5 of common insulators, helping reducing heat loss and optimizing space utility.

持久耐热
气凝胶的三维网络结构避免了其他保温材在长期高温或受到振动而产生烧结变形、颗粒堆积保温性能急剧下降的现象。
Long service life
Unlike other traditional insulation materials, aerogel ’s three- dimensional, intertwined structure inhibits sintering warpage, and particles stack which may occur under high temperature for long time. Therefore, aerogel insulation has long service life.

抗拉抗裂
有较好的柔性与抗拉强度，可抵抗施工时的拉伸和冷热交替时线性收缩带来的内应力。
Physically Robust
FMB400 has flexibility and high tensile strength, resisting stretching and stress from linear contraction when temperature changes.

环保防腐
产品由无机材料组成，不含对人体有害的物质。可溶出氯离子含量极小，对设备和管道无腐蚀。
Environmentally Safe
Composed of inorganic materials, FMB400 contains no hazard. Stripping little chloridionm will cause no corrosion to the equipments and pipes.

隔声抗震
对设备进行保温的同时，还可以起到吸声降噪、缓冲震动等功能，提高环境质量，保护设备。
Sound resistance and Shock Absorption
sound resistance and shock absorption help better the environment quality.

便于施工
产品密度200kg/m3，轻巧方便，易于切割，施工 。
Easy to Install
Extremely low density (<200kg/m3) contributes to easy-to-cut and easy-to-install
不同温度下导热系数Thermal Conductivity at Different Temperature

不同温度下导热系数Thermal Conductivity at Different Temperature
温度（℃）Temperature 100 200 300 400
导热系数(W/(m&#8226;K))
Thermal Conductivity 0.017 0.021 0.025 0.030

性能参数Specification Compliance and Performance
测试内容 Properties 测试结果Results 测试方法Test Procedure
尺寸稳定性(max)
Dimensional Stability 1% GB/T 8811
压缩性能(min),Kpa,@10%
@25%
Compressive Stress Strain 60 GB/T 13480
120
燃烧等级Fire Rating S4 E DIN 5510
烟雾等级Smoke Spread SR-2
滴落物等级Flaming Droplets ST-2
烟气毒性FED值,max LCo 0.1
耐腐蚀性Corrosion Resistance 通过 passed GB/T 3810
拉伸强度(min),Kpa Tensile Strength 100 GB/T 17911

施工厚度Thicknesses Required to Prevent Surface Condensation
不同温度、管径时的施工厚度
Thicknesses(mm) vs. Temperature (℃) and Nominal Pipe Size
工况条件：环境温度=25℃,高表面温度=50℃,风速=0m/s.
Design conditions: ambient temperature = 25℃, Wind speed = 0m/s, Max. touch temp = 50℃</a>